Incident 5

Figure 1-11. Incident 5 Diagram

Now that the MPLS issues appear to have been fixed, users on vrf ROUTERS on R2 and R3 are complaining that they cannot see the route to VLAN 27.

Investigate and prove connectivity with a valid route and successful ping from R2 and R3 user subnets to the Sw2 VLAN 27 interface as follows:

R2# ping 120.100.27.2 source 120.100.2.2
Type escape sequence to abort
Sending 5, 100-byte ICMP Echos to 120.100.27.2, timeout is 2 seconds:
Packet sent with a source address of 120.100.2.2
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 28/31/36 ms

R3# ping 120.100.27.2 source 120.100.3.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 120.100.27.2, timeout is 2 seconds:
Packet sent with a source address of 120.100.3.3