260 Chapter 9 CONFORMING AND FINISHING Therefore, you will need to decompose multiple times, once for one set of clips (SD or HD) and then again for the remaining clips. The order (SD then HD or HD then SD) is not significant. The following section will illustrate the procedure for a mixed 30i NTSC and 1080i/59.94 conform. The other conforms that sup- port mixed format clips follow a similar procedure. 1. Create a 1080i/59.94 online project. 2. Copy the bin containing the NTSC offline sequence and prepare for the conform as discussed in the "Preparing to Recapture" section on page 236. 3. Change the project format to 30i NTSC. 4. Decompose the offline NTSC sequence. 5. Sort the bin by tape name and delete all the clips that came from an HD source tape. 6. Continue with the conforming workflow as discussed on page 239 to recapture the SD clips. After you have finished capturing the SD clips, return to this workflow to continue for the HD clips. 7. Change the project format to 1080i/59.94. 8. Decompose the sequence. Be sure to select the "Offline