78 CHEMICAL SENSORS. VOLUME 5: ELECTROCHEMICAL AND OPTICAL SENSORS REFERENCES Achmann S., Hammerle M., and Moos R. (2008) Amperometric enzyme-based gas sensor for formaldehyde: Impact of possible interferences. Sensors 8(3), 1351­1365. Alber K.S., Cox J.A., and Kulesza P.J. (1997) Solid-state amperometric sensors for gas phase analytes: A review of recent advances. Electroanalysis 9, 97­101. Alberti G., Casicola M., and Palombari R. (1993) Amperometric sensor for carbon monoxide based on solid state protonic conduction. Solid State Ionics 61, 241­244. Alberti G. and Casciola M. (2001) Solid state protonic conductors, present main applications and future prospects. Solid State Ionics 145, 3­16. Albery W.J. (1982) Carbon dioxide measurement. U.S. Patent 4,377,446. AlNashef I.M., Leonard M.L., Matthews M.A., and Weidner J.W. (2002) Superoxide electrochemistry in an ionic liquid. Ind. Eng. Chem. Res. 41, 4475­4478. Anantaraman A.V. and Gardner C.L. (1996) Studies on ion-exchange membranes. Part 1. Effect of humidity on the conductivity of Nafion. J. Electroanal. Chem. 414, 115­120. Anastas P.T. (2007) Introduction: Green chemistry. Chem. Rev. 107, 2167­2168. Anderson G. and Hadden D. (1999) The Gas Monitoring Handbook. Avocet Press, New York. Ando M. Recent advances in optochemical sensors for the detection of H 2 , O 2 , O 3 , CO, CO 2 and H 2 O in air. Trends Anal. Chem. 25, 937­948. Aroutiounian V. (2007) Metal oxide hydrogen, oxygen, and carbon monoxide sensors for hydrogen setups and cells. Int. J. Hydrogen Energy 32, 1145­1158.